• ZEV TECHNOLOGIES GRIP SERVICE

ZEV TECHNOLOGIES GRIP SERVICE

Article:

About Product

When purchasing a Glock® there are 3 top complaints. The factory sights, trigger pull and feel of the frame in hand. Zev Technologies™ has the answer to the grip discomfort, a simple grip job that will adjust the feel of the frame to make a more comfortable fit to the owner's hand. Our Fulcrum Trigger will address the trigger pull and we also have sights that made out of quality material that will replace the factory plastic items. All items available for free installation with grip work.

ALL images associated with selections are on Generation 3 Glock® Standard size model frames.

Standard frame models: (17, 22, 33, 34, 35, 17L, 24. Gen 1-3 & 4)
All standard frame models come with the blank mag-well section at the bottom of the frame for mag-well installation at a later time. Comes standard with a grip work on these models. Any other modifications are consistent across all other models.

Compact frame models: (19,23,32. Gen 1-3 & 4)
All compact models that come in for work are textured to the bottom of the grip, unless otherwise requested or specified, at this time we have a mag-well for these models. Item must be purchased at the same time or shipped with the frame. All other modifications are consistent across all other models.

Sub-compact Frame Models: (26, 27, 33. Gen 1-3 & 4)
All sub-compact models that come in for work are textured to the bottom of the grip, all other modifications are consistent across all other models.

Large Frame models: (20 & 21, 30 & 29, 41 & 40 Gen1-3, SF & Gen 4 )
All large frame models that come in for work are textured to the bottom of the grip. Due to the material dimensions of large frame models, a flat backstrap reduction is not possible and any orders placed with this selection will be automatically updated to a 50% backstrap. All other modifications are consistent across models.

IMPORTANT

  • ANY items that will affect the grip function must be shipped with the Frame
  • IF you have a Generation 4 model and use the backstrap you must send it in.
  • Back-straps not usable with a ZEV mag well.
  • IF you are planning on having a trigger installed please send the fully assembled firearm for proper installation and testing.





  •  
  •  
  •  
  • SHIPPING INSTRUCTIONS TO ZEV:

    No shipping of a firearm through the US Postal Service unless directly from a Licensed Gun Store (FFL). IF shipped from an FFL it must go back to that same FFL. Customers should ship their frame/firearm UPS or FedEx Next Day Air (Saver) or faster. Insured for replacement value of item.

    Zev Technologies™ is not responsible for Items lost in shipment, or improper shipment to our location.

    Recommendations: Do not use a UPS Store, do not use a FedEx dropbox, Package up your firearm PRIOR to going to any UPS or FedEx shipping centre, INCLUDE printed copy of your Sales order quotation.

    More shipping information here:
    UPS
    http://www.ups.com/content/us/en/resources/ship/packaging/guidelines/firearms.htmlsrch_pos=1&srch_phr=gun

    FedEx
    http://www.fedex.com/us/service-guide/after-you-ship/terms/express-ground.htmlqgroup=toggle-c1&qid=firearms
    Under US Terms & Conditions >> Firearms

     

    Guns may be shipped to:

    ZEV Technologies
    3712 Northpark Drive
    Centralia, WA 98531



    Any other questions feel free to call us @ 805-486-5800
  • TEXTURE SELECTION:

    Stippling is a permanent, aggressive texture applied to the frame using heat. It is a versatile texture used for home defense, range usage, and competitions. Stippling can also be used for concealed carry and individuals with softer hands. Stippling of the frame provides a stronger, more secure grip on the firearm.

    CCW Stippling is a permanent, aggressive texture applied to the frame using heat. Most commonly used for concealed carry. The stippling texture is still aggressive on the front & backstraps of the frame. However, the sides have been softened to prevent printing on clothing and abrasion of the skin. Stippling of the frame provides a stronger, more secure grip on the firearm.

    Light Silicon Carbide is a semi-permanent, mildly aggressive, texture that is adhered to the frame after shaping.The light texture comes in black and feels similar to 100-120 grit sandpaper. Some shooters may find it too aggressive for concealed carry, but is an excellent all-purpose texture. Silicon carbide texture creates a secure, steady, aggressive texture allowing the shooter to maintain control of the firearm.

    Standard Silicon Carbide is a semi-permanent, aggressive, texture that is adhered to the frame after shaping.This texture comes silver and feels similar to 80-100 grit sandpaper. Not suggested for carry, but excellent for all range usage and home protection. Standard Silicon carbide texture creates a secure, steady, aggressive texture allowing the shooter to maintain control of the firearm without necessity of gloves.

    Heavy Silicon Carbide is a semi-permanent, highly aggressive, texture that is adhered to the frame after shaping.This texture comes silver color and texture feels similar to 60-80 grit sandpaper.Texture definitely not suggested for carry but is great for all competition usage. Gloves are recommended for this texture. Heavy silicon carbide texture creates a secure, steady, aggressive texture allowing the shooter to maintain control of the firearm with gloves.

  • Stipple
  • CCW Stipple
  • SC - Light
  • SC - Standard
  • SC - Heavy
  • FINGER SELECTION

    No change to the finger grooves, keeps the frame at the same girth, height of finger grooves factory, and postioning of the fingers.

    Medium reduction of the finger groove, leaves some of the high points but reduces the height that causes fingers to shift position. Reduces the overall girth of the frame slightly.

    Complete removal of the finger grooves, flattening of the front of the frame. Reduces the overall girth of the frame in hand. The most reduction that can be done.

  • Keep
  • Reduced
  • Remove
  • UNDERCUT SELECTION

    A single undercut underneath the trigger guard allows you to get a higher hold on the frame with the shooting hand making it more comfortable to hold. The mild shaping and polishing reduces discomfort on the middle finger of the shooting hand.

    A double undercut of the trigger guard allows the same comfort with the shooting hand that the single undercut gives you, with the ability for a higher hold on the frame of the pistol with the support hand. The removal of material and texturing on the underside of the trigger guard allows for an indexing point and adds stability for the support hand.

  • Single
  • Double
  • BACKSTRAP REDUCTION

    No backstrap reduction performed on the frame. Maintains factory backstrap angle as well as factory feel in hand.

    Reduction of the hump on the backstrap of the frame by half before texturing, reducing some of the overall girth of the firearm and adding to ease of sight acquisition.

    Reduction of the hump on the backstrap of the frame making it straight flat line from the beavertail section to the bottom of the frame prior to texturing. Reducing the overall girth of the frame and adding to ease of sight acquisition.

  • None
  • 50%
  • Flat
  • THUMB TEXTURE

    Typically both sides leave the gun balanced for usage and indexing points. Some shooters prefer the texture on only the support hand side. This is all preference for each individual shooter.

  • Left side only
  • Right side only
  • Both sides