POF Rogue pistol

The Rogue features a stylized forged receiver set, stainless steel match grade barrel, KeyLock DI BCG, ambidextrous selector, multiple QD sling attachment points, and Renegade rail & oversized heatsink barrel nut, all topped off with our Micro B muzzle brake. POF-USA’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor. POF mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes. Complete modularity of the Renegade and Renegade Plus is achieved by the 14” Renegade Forend. Sleek and rugged mounting system, lightweight, and QD mounts in all the right places – 2 per side. Add to that M-LOK® compatibility on 3 sides and a cut out to easily adjust the DIctator Adjustable Gas Block and your new Renegade rifle is ready to defend, compete, or hunt. POF Keylock Bolt Carrier Group is comprised of a Nitride heat treated carrier and stainless steel gas key. The gas key is secured with a staked screw and dove tailed into the carrier for an extremely rigid design. This design helps reduce carrier tilt. It features a nickel plated bolt & extractor, and chrome plated firing pin. The finishes are both corrosion resistant and introduce lubricous characteristics to the action. POFpatented roller cam pin is just one more example of how we strive to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF-USA’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.