DMB The Side by Side Gun

Price do not include engraving! The barrels are bolted down by three bites, two on the lumps which are wider than normal ( 400" as opposed to .350" ). The third bite is on the top rib extension. The mechanical efficiency in cocking the locks is effected by a sliding bar under compression on dropping the barrels. The locks are mounted on the trigger plate with the pivoting limbs bridled to a solid upright bar. The strong mainsprings are of a bow type with roller bearings acting on the tumblers, and the sears are geometrically positioned to give clean crisp trigger pulls. The limbs are gold plated and the locks are contained in the head of the stock assuring maximum protection from the weather. The ejector mechanism, contained within the action body, is powered by substantial coil springs which are compressed when closing the barrels giving the gun assisted opening. The barrel tubes are of chopper lump construction, forged from quality alloy steel. The gun is made in all gauges and the weight can vary with the specification of barrel length, type of barrel ribs, choke boring, wood density and balance. Years of experience supplying guns, in both side by side and over and under design, for hunting in the states, shooting over dogs. Small bores, in 410 and 28 gauge, are popular with quail hunters. A typical specification would be 29" barrels, 2 3" chambers, bored IC and Mod, straight hand stock with double triggers for instant choke selection, plating 60/40% on the mark. Numerous importers throughout the states dealing with importation David McKay Brown guns.