BCM Barrel Block

BARREL BLOCK - During the stock manufacture a bed is totally created from it, machined from solid  from a 32 kg aluminum block, in order to get 2 stocks of 3,4 kg each. Thus we’re talking about a monolithic structure and not of an added part like some custom products. The bed is then secured in the upper part by a cap sealed with 8 screws tightened with an 8 N torque for a total of 64 N tightening power. Like the barrel, also this system allows a complete floating action, avoiding all the possible tensions due to an incorrect tightening. The stock can be made in any available color  through  anodizing  process: light grey, anthracite grey, black, army green (all of them are quite scratch resistant), electric blue, red, bright green or bronze. Its mechanics is made up of a typical two locking-lugs bolt, which is placed in a 17/4 ph steel chassis (this kind of steel is highly resistant to torque and cut). Available in single-shot version only, in order to keep its floating mechanics. The shooting potential of this weapon is extremely easy to perform, thanks to floating mechanics, which is very flexible on the vibrations of reload and totally resistant to temperature changes. The same stock set-up, specifically conceived for shooting, is of great help: : a 76 mm width  forend, windage  adjustable cheepiece, and length, height and rotation adjustable  buttpad. Jewell BR (doubtless quality pack) is used as a trigger. The barrels are all best choice quality between Border,Pac Nor or Broughton trademarks.