Ballistic Plates - Level III, III+, and IV

Front and back sets of ballistic plates in three options: level III, level III+, and level IV. Legal export from the United States with an EAR license obtained by us on your behalf. We do all the paperwork based on a simple questionnaire.

The retail prices shown on our listings are indicative. Please get in touch with us to determine the import conditions and final costs.

1) Set of Two Level III Ballistic Plates

A set of ballistic plates with bulletproof level three (Level III) front and back. The plates are certified by NIJ (National Institute of Justice). They stop shrapnel, pistol, and rifle bullets.

Anti-ricochet coating (anti-spall). This coating is very important because the bullet does not disappear after hitting the ballistic plate. It breaks into small pieces that scatter along the surface of the plate at a speed similar to that at which the bullet itself was flying. If they hit us in the neck or femoral artery, they will cause serious wounds or death. The anti-ricochet coating is a rubber-like layer in which fragments sink and stay. The anti-ricochet coating in these ballistic plates will withstand 2-3 hits with classic 5.45x39 ammunition close to each other.

Official Level III certification assumes the retention of regular 7.62x39, 5.45x39, 5.56x45, 7.62x51 or 7.62x54 ammunition. These are the calibers for the weapons: AK47, AK74, M4/M16, M14, SWD.

The plate is made of AR500 steel.

2) Set of Two Level III+ Ballistic Plates

A set of ballistic plates with bulletproof level three plus (Level III+) - front and rear. The plates are certified by NIJ (National Institute of Justice). They stop shrapnel, pistol, and rifle bullets.

The set comes in three options:

- Base coating

- Kevlar coating

- Kevlar coating plus a set of trauma pads (shock-absorbing pillows/inserts)

Official Level III+ certification assumes the retention of regular 7.62x39, 5.45x39, 5.56x45, 7.62x51, or 7.62x54 ammunition (including some armor-piercing ammunition). These are the calibers for the weapons: AK47, AK74, M4/M16, M14, SWD. AR550 steel from which these plates are made, in practice also stops some types of anti-tank ammunition (5.45x39 7N6 and 5.56x45 Greentip). Here is a video where you can see how these plates react to 7N6 anti-tank ammunition with a steel insert.

3) Ballistic plates class/level IV RF3-100 – Set of two pieces

Ceramic ballistic plates class IV according to the NIJ classification by United Shield International. It is certified NEW NIJ 0101.06 - Level IV.

Stand-alone ballistic plates - this means you don't need a trauma pad or anti-ricochet coating. The ballistic plate is covered with an outer coating made of waterproof black Cordura. Low weight, low thickness, high-class protection against armor-piercing ammunition and common intermediate ammunition. Five-year manufacturer's warranty.

The standard size of the ballistic plate means that virtually any bulletproof vest can accommodate it.

THE PRICES ARE FOR THE SET OF TWO (FRONT + BACK)